Description
Shelco’s proven single shell design has been a standard in the industry for over 30 years. Available in either 316L Stainless Steel or Brass Head with a 304L body, the RH series is perfect for almost any application. The maximum design working pressure is 300psi @ 200°F. The RH series is available in a wide range of connection sizes to fit your application as well as a wide variety of gasket options that make this housing compatible with almost any fluid. The standard gasket material is Buna-N. Please refer to our ordering guide for a complete list of options or contact one of our technical specialists for help.
Features and Benefits
- Housing accepts double-open-end cartridges
- Simple ring closure for quick cartridge change outs
- Knife edge seal at both cartridge ends to eliminate by-pass
- Heavy duty construction for durability
- Stainless steel drain plug
- Inline ports for easy installation
- Mounting bracket kit included
- 1/2" Ports
| Example Ordering Guide with Options | |||
|---|---|---|---|
| RH | S– | 78 | 8– |
| Model | Material | Cartridge Length | Pipe Size FNPT |
| RH | S = 304L Stainless Steel with stainless steel drain plugs |
78 = 9-3/4" 80 = 20" 90 = 30" |
4 = 1/2" 6 = 3/4" 8 = 1" |
| 1F– | E |
|---|---|
| Options | Gasket |
|
Blank = None BSP = BSP Thread 1F = 1" Flange 1TC = 1" Ferrules *Vent = Vent Screw *GP4 = 1/4" gauge port *GP8 = 1/8" gauge port BR = Bracket Kit DSG = Variable Seal (spring loaded) TH = Tee Handle 10 = 10" Cartridge Length 195 = 19-1/2" Cartridge Length 294 = 29-1/4" Cartridge Length |
Blank = Buna E = EPR S = Silicone V = Viton |
* When ordering vents or gauge ports you must specify location: I=Inlet, O=Outlet, I/O=Inlet & Outlet. Example: GP4I or GP4I/O
